Resin Bond Diamond Grinding Di

Description of resin bond diamond grinding disc/laps : Instructions and maintenance for the resin bond lap: To get the best results, it is recommend to first cut the stone on a cutting disc of 600 or 1200 mesh. Polishing is acomplished with a constant drip of water by moving the stone across all the area of the lap, to obtain a brilliant flat surface. It is important to move the stone across the entire surface of the lap in order to maintain a smooth and flat polishing surface. Ideal for emeralds or any other stones that may be heat senstive. Effective for any kinds of gems except corundum. Works for stones in the 1-2 ct. size range. The polishing powder is impregnated into the resin bond lap eliminating the need for any additional agents. All that is added is water. This long lasting lap with a polishing layer of 6mm, only requires dressing from time to time. Recommended operating speed is up to 1500 RPM. When a light dressing is needed, a fine carborundum bar can be used to remove any ripples and to restore a perfect flat surface. Plenty of water is required while dressing. No scoring is needed!! Application of resin bond diamond grinding discs/laps : diamond millstone is mainly used for glass polishing and crystal polishing, like gemstone, quartz glass, agate etc .Resin bond diamond grinding discs are widely used for fine face grinidng in various industries. Main features of resin bond diamond grinding disc/laps: 1. Efficient batch double and single side grinidng 2. High wear resistance and long working life 3. High parallelism and flatness of workpiece 4. Good surface quality Specification of resin bond diamond grinding discs/laps: Diameter :6″, 8″ Grit :60#, 80#, 100#, 180#, 260#, 360#, 600#, 1,200#, 3,000# Configuration: without backing plates, with backing plates

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29