Plaster Molding Silicone Rubbe

Description of RTV-2 Silicone Rubber for Plaster Mold Making RTV-2 silicone rubber is a two-component material, this kind of silicone rubber consists of Part A base silicone and Part B CA30 curing agent, and Part A base silicone and Part B curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicone molds: plaster polyurethane, PU, GRC, cement, resin, polyester, wax etc... Features of RTV-2 Silicone Rubber for Plaster Mold Making 1. Good flow ability and long working time 2. Medium hardness 3. High tear and tensile strength 4. Easy de-mould from complex replica parts 5. Acid and alkali-resistance 6. Low linear shrinkage Applications of RTV-2 Silicone Rubber for Plaster Mold Making RTV2028/2030 silicone rubber is suitable for plaster, sculpture and GRC mold making. Technical datasheet of RTV-2 Silicone Rubber for Plaster Mold Making Base and Curing Agent Mixture (100:2 by weight) in 25 ℃ (77F) testing Item No. RTV 2030 Color off-white Curing agent CA30 Mixing ratio 100:2 Mixed viscosity *-* cps Pot life 30-40 Minutes Curing time 4-6 Hours Hardness 28-30 Shore A Tear Strength 30 N/mm Tensile Strength 3.8 MPA Relative density 1.15 g/cm3 Shrinkage ≤0.3% Elongation at break 480%

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29