Move to www.1688club.com now,This Website will be closed
SearchSearch

250W Solar Module Solar Cell Solar Panel

ID:573927 View:1566 Collection
Date Listed: 2019-02-18 17:06:11 Country: China»Guangdong»Zhongshan
Poster: Yan Company: Guangdong Jiuzhou Solar Energy Science&Technology Co., Ltd.
Location: No.9,Xingye Road,Torch Hi-tech Industrial Zone Website: Guangdong Jiuzhou Solar Energy Science&Technology Co., Ltd.
Email: pmy@jiuzhousolar.com Mobile: 76088333022
Fax: MSN:

Specification: Model number:RL-FM130 Solar Cell:Monocrystalline Maximum power (Pmax):250W Maximum power voltage (Vmp):18.2V Maximum power current (lmp):13.74A Open circuit voltage (Voc):22.3V Short circuit current (lsc):14.62A Max system voltage:1,000VDC Max charging current:15A Operating temperature:-40℃ to +85℃ Product application:Class A Weight:18.73kg Dimensions (mm):1118*700*68 Operation Instruction: 250W folding solar panel will perform at its peak when it faces directly towards the sun. ADJUSTABLE SUPPORT LEGS 1.When the locking handle is at 90 degree. The support legs are loose and the angle of the solar panel can be adjusted. 2.When the locking handle is at 45 degree. The support legs are locked and cannot move. CONNECTING YOUR SOLAR PANEL 1.Now that the panel is setup facing directly towards the sun. Proceed to connect the positive and negative clips to you battery. 2.Always connect the battery clips to the battery first, then insert the solar panel Anderson plug into the battery wire Anderson plug. You controller will then light up to show that it is working. DISCONNECTING & STORING YOUR SOLAR PANEL 1.Disconnect the Anderson plug off the battery clips first and then proceed to take the battery clips off the battery. 2.Roll the 5m extended wire neatly into the storage clips behind the solar panel. NOTE: MAKE SURE NOT TO TWIST OR KINK THE WIRING IN AN UNNATURAL WAY. 3.NEVER STORE YOUR SOLAR PANEL WITH THE BATTERY WIRE CONNECTED TO THE PANEL. 4.PLACE THE BATTERY WIRE SEPERATELY IN THE FRONT POCKET OF THE CARRY BAG. TIP: For optimal performance through-out the day, set the panel to approximately 30° from the ground. Anywhere between 10° and 40° will gain the best power absorption across the course of the day.

Please Note that this information was issued on BestB2B.com!

High Quality TC TG TB Oil Seal NBR FKM ACM VMQ Oil2024-02-03

costa rica liquid nitrogen sample storage tank 2024-02-02

NQKSF Oil Seal Brand New High Quality FKM Seals2024-02-01

Syria nitrogen semen tank KGSQ five-wheeled cart2024-01-31

Honduras large diameter liquid nitrogen container2024-01-29

Wholesale Good Quality NQK O Ring Seals2024-01-29

Charging market environment continues to evolve2024-01-29

EVs High Voltage Cable Development Thread2024-01-29

China supply Support ring FK4E39-K for power plant2024-01-29

Lock nutboiler feedwater pump HPT200-330M for powe2024-01-29

China Manufacturer Respirator DG600-240-05-15-00 f2024-01-29

China made Hu bevel gear 0130/0010/0140 for steam 2024-01-29

Liquid-cooled cables for EV high-power charging2024-01-29

EV High Voltage Cable Connection Differences2024-01-29

Made In China Gearbox Seals Dustproof Oil Seal2024-01-26

Important Safety Warning: Avoid fraud by meeting all sellers in-person to pay for items. BestB2B.COM does not offer any transaction or payment services.