Electrode torque wrech

Graphite electrodes are used in Electric Arc Furnace and Ladle furnace. For the need of manufacturing and usage, the electrodes are much longer in the actual process of production, and they will be connected with many pieces of short electrodes by conical graphite nipples. The effectiveness of energy utilization and normal melting work is greatly influenced the correct joint between graphite electrodes. In the using process of torque wrench, in order to guarantee the good using of graphite electrodes, the requirements are as follows: 1. The conical nipple’s threads has no damage, no dust and impurities; 2. There should have an optimum value for wrenching electrodes, the strength should be neither too strong nor too weak. If the wrenching strength is too strong, the electrodes would twist off easily. If too weak, it might cause electric arc in the joint of electrodes,the joint would be sudden rubefacient, oxidized, pencilling, and then break off., so properly controlling the wrenching strength is very important.

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29