HG-4- Pipe Dryer

On a small scale, the simplest and most cost effective way to dry biomass particles is with hot air current dryers, which are also commonly referred to as pipe dryers At the start of the dryer is the hot air stove The stove can used on: Waste wood Logs Briquettes or pellets to generate the hot air required for drying A fan is used to create the required suction through the pipe network The raw material particles are placed at the start of the pipe work system, and the fan pulls the hot air and particles, which are suspended in the hot air stream, from the stove through the pipe network to the cyclone separator Technical parameters: Main power: 4kW Particle size: less than 5mm Capacity: 200 to 400kg/hr Wood fuel need: 30kg/hr Dimensions: 9,000 x 1,300 x 2,500mm Weight: 950kg We also supply other models pipe dryers such as HG-6 and HG-8 which have different capacity

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29