FJ-40-hammer mill

Before pellet or briquette compression can take place, the raw material must be reduced to a suitable particle size Depending on the raw material size, a one or two stage size reduction process will be needed To reduce the size of wood chips and other suitably sized biomass raw materials to the correct particle size and a hammer mills is used A hammer mill works on the principle of attrition A rotating center with a collection of flailing hammers impact at high speeds, shattering the material into particles A screen with the desired particle size ensures the correct particle size is produced Capacities: 200 to 300kg/h Power: 11kW Diameter of feeding material: less than 30mm Finished products: around 2mm which can be directly used to make wood pellet or briquette Weight: 250kg

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29