Groove Set Screw Sprockets

Description Groove Set Screw Sprocket is generally used to transmit rotary motion between two shafts and to provide linear motion to a track, tape etc. This type sprocket is always in small size, such as 25, 35,04B,05B. To avoid collision for chain and sprocket hub, groove must be produced. This sprocket only can be made set screws to be tighten because of its small bore. The roughness of bore is high to engages with shaft tightly. All the products are according to standard regulations, such as DIN 8187; DIN 8188; ISO/R 606 and ANSI B 29.1. Specification 1. Material: 1045, Q235, 40Cr 2. Surface Treatment: Customized 3. Heat treatment: High- Frequency Quenching 4. Hardness: HRC 42-48 5.Type: Suit for all types 6. Lubrication: Light anti- rust oil 7. Package: Plastic bag for each piece, Plywood case 8. Warranty Time: 12 months Application This type of sprockets is usually used on small equipments with small load and not high speed.

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29