MTP/MTO connector or pigtail

MTP stands for "Multifiber Termination Push-on" connector and it is designed by USConec and built around the MT ferrule. Each MTP contains 12 fibers or 6 duplex channels in a connector smaller than most duplex connections in use today. It is designed as a high-performance version of the MPO and will interconnect with MPO connectors. MTP connector is manufactured specifically for a multifiber ribbon cable. The single mode version has an angled ferrule allowing for minimal back reflection, whereas the multimode connector ferrule is commonly flat. A 72-fiber trunk cable can be terminated with six MTP connectors; relocating a 256-channel ESCON director now requires only re-plugging 43 connections. Trunk cables terminated with multiple MTP connectors are available in four versions, either 12 fiber/6 channels, 36 fiber/18 channels, 72/36 channels, or 144 fiber/72 channels. The typical insertion loss for MTP connectors is 0.25dB. From a design perspective, it is recommended to use a loss margin of 0.5dB for MTP connections. Optical alignment is facilitated by a pair of metal guide pins in the ferrule of a male MTP connector, which mate with corresponding holes in the female MTP connector. MTP connector allows high-density connections between network equipment in telecommunication rooms. It uses a simple push-pull latching mechanism for easy and intuitive insertion and removal. The end of MTP connector may be polished flat or at an 8° angle. It is the same size of a SC connector but since it can accommodate a maximum of 12 fibers, it provides up to 12 times the density, thereby offering savings in circuit card and rack space.

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29