Tire Molding Silicone

Tire Molding Silicone Tire Molding Silicone is great to make tire molds either with simple or intricate patterns. With the excellent tension and tear strength, flexibly, especially almost nil shrinkage. Molds from this kind Silicone rubber always can help them make a perfect molds and high temperature resistance and durable life. Part A: an non-toxic and odorless liquid in translucent color with platinum inside Part B: an non-toxic and odorless liquid in translucent color. ATT: We do any curing time as you requirements 1)Amazing fluidity and easy to operate 2) Platinum-based (environmental,odorless and nontoxic) 3) Delicate design available 4) Mixing ration: 1:1 and 10:1 are available 5)Easy de-molding 6) Excellent tension and tear strength 7)High performance in duplication 8) Non shrinkage 9) Excellent resistance to weather, temperature, aging, acid & aging-Proofing. High resistance to high temperature and aging(resist -60 to 250°C) Typical general characteristics Inspection Method Value Product data (Catalyzed A+B) CS15# CS20# AS20# AS40# Hardness Shore A 15±2 20±2 20±2 40±2 Mix Ratio A:B 100:3 100:3 1:1 1:1 Color white white Transparent Transparent Pot life 25 °C (77F) 30-40 30-40 30-40 30-40 Curing time 25 °C (77F) 3-4 3-4 3-4 3-4 Viscosity mPa.s *±1000 *±1000 5000±1000 9000±1000 Tensile -Strength M.pa 2.9±0.3 3.1±0.3 4.5±0.3 6.5±0.3 Tear-Strength kg/cm 18±2 20±2 22±2 22±2 Elongation % 510 530 480 450 Shrinkage % 0.25 0.25 0.1 0.1 1Year at least, stored in a cool and dry place under room temperature 25℃ 1. No contact with your Food or Drinking Water etc. 2. Keep Out Of Reach Of Children. 3 .As addition cure silicone is a kind of platinum cure system ,which will be easy to cause uncure problem ,so Kindly follow the tips below : 1)Do not mix with liuqid condensation silicone rubber or even the tool which used for condensation silicone 2)Do not mix with organic matter which contai....

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29