Auto feeding laser cut machine

Model LP-C1610/1630AF Working area 1600x1000mm/1600*3000mm Equipment size 2200mm×1720mm×1170mm Laser power 60W/80W/100W Laser type: Sealed Co2 glass laser tube Working area 1600mm×1000mm Voltage AC220V±10%,50HZ Cooling way Water-cooling and protection system Working speed 0-*mm/min Resolution ≤4000dpi Repeat Accuracy ±0.1mm Driving mode Stepper motor Support format BMP,PLT,DST,DXF,Al Minimum shaping letter 1mm, Chinese 2mm Working temperature 0-45°C Working humidity 5%-95% (no-cemented water) Total power <1,000W Advantages: 1) No burr/fraying with laser cutting: Laser cutting is done by high temperature process. It can make cut edge to close up automatically. Hence, no need to recut the patterns after one-time cutting. 2) No distortion to the processed fabric: In the process of cutting, laser dose not touch the processed fabric, but laser beam works on the fabric. 3) High precision: Diameter of the laser beam can be focalized into 0.1mm.Cutting is done exactly according to uploaded graphics through computer control. 4) High efficiency and easy operation: Just upload the graphics into the cutting machine and laser will cut fabric into shapes as designed.

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29