glue for laminated machine

Method for making the Glue Process: 1. Water: 2KG. 2. Glue powder: 1kg (1 bag), put into the water and mix up. 3. 96% caustic Soda 0.035kg (in Winter), 0.03kg (in Summer), and borax 0.02-0.025kg, add into 0.6kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (Note: When making the glue, be sure to control the quantity of Caustic Soda based on the quality of Caustic Soda.) 4. Tributyl phosphate (AR grade) : 1 cap (Use the cap of the bottle is ok), about 30ml. Pour into glue solution and mix up. (Note: This product is mainly used as a defoamer, please don’t add too much, or it will effect the viscosity of the glue.)

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29