API610 BB4 multistage high pre

API610 BB4 multistage high pressure pump/BFP pump API 610 Standard Pump,Multistage High BFP Pump,multistage high pressure pump Design: All parts and components of the SBD series pumps are designed as interchangeable standard parts, which greatly helps to reduce the storage of spare parts. Intermediate Casing O-rings are designed between intermediate casings when connecting the sections with tie-bolts. Metal gaskets may also be used to replace the O-rings in case of necessity. Suction and discharge casings are normally supported with feet construction. However, center supports are used for SBD150, as well as SBD80 and SBD100 when Temp. of pumped media exceeds 150℃. Hydraulic Model and Balancing of Axial Force Two different hydraulic models (Impellers and diffusers) are designed for each specification and model to expand the operating range with high efficiency. Replaceable wear rings are adopted for sealing between impeller and casing. Most of the axial forces shall be balanced by hydraulic balancing device (drum) and the residual force shall be borne by thrust t bearings. All SBD pumps are oil lubricated, except SBD25 which is lubricated with grease. Performance Data: Capacity: Up to 500m3/hr Head: Up to 1200m Operating Press.: Up to 15MPa Operating Temp.: -80 ~ +180℃ Applications： Water supply, Thermal power plant feed water pump/cooling water pump, Pipeling pressure boosting, Refrigeration project Flanges Discharge flanges and suction flanges of center supported pumps are designed as Vertical up, while suction flanges for foot supported pumps can be arranged in any direction. Shaft Sealing In general, balanced type Mechanical seals shall be used for shaft sealing. Soft packing is also applicable if necessary. Shaft seal shall only bear as much as the suction pressure because discharge pressure shall be reduce after passing through the balancing drum. Packing gland shall be cooled in case ....

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29