Heat Strengthened Glass

1Heat Strengthened Glass 15mm Heat Strengthened Glass Heat Strengthened Glass for laminated glass Heat-strengthened glass differs from tempered glass in surface compression; its mechanical strength is about 1.6-2 times that of annealed glass. Specification Properties Heat-Strengthened Glass Thermal Shock Resistance Up to 130°C Mechanical Strength Two times stronger than annealed glass Fragmentation Knife Edges Tensile Strength 40-55 MPa Bending Strength 40 N/mm2 Design Stress for Architectural Purpose 17 MPa Features 1. Heat-strengthened glass differs from tempered glass in surface compression; its mechanical strength is about 1.6-2 times that of annealed glass. 2. Heat-strengthened glass has outstanding thermal stability, its flatness and light transmission is close to that of annealed glass and much better than that of tempered glass. 3. HS Glass is 3 times more resistant to thermal stress in comparison to normal annealed glass. 4. It can withstand temperature difference of 100°C (in range of 50°C to 150°C) compared to ordinary annealed glass which can withstand up to 40°C. 5. Heat strengthened glass is that it is far less susceptible to spontaneous breakage. Application Heat-strengthened glass is widely used in laminated glass for additional strength, such as in overhead and sloped glazing.

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29