2000mAh Li-ion battery
ID:182898 View:2098次 |
Date Listed: | 2019-08-26 15:36:19 | Country: | China»Jiangsu»Taixing |
Poster: | Yuanyuan Zhang | Company: | Jiangsu Sunpower Co., Ltd. |
Location: | No. 8, Xingyuan Road, Huangqiao Industrial Park, Taixing, Jiangsu, China | Website: | Jiangsu Sunpower Co., Ltd. |
Email: | andrew@jssanjie.com | Mobile: | +8613915713028 |
Fax: | 86-0512-58566663 | MSN: |
INR*-2200mAh battery,2000mAh Li-ion battery supplier,lithium ion battery for power tool,power tool lithium ion battery supplier 2200mAh Li-ion battery Product Details: NO. Items Specifications 1 Model INR*-2200 2 Can Material Ni-Iron 3 Rated Capacity 2200 mAh(0.2C5A) 4 Nominal Voltage 3.7V 5 Max. Charge Voltage 4.2 V 6 Discharge Cut-off Voltage 2.75V 7 Max. Charge Current 1 C5A 8 Standard Discharging Current 0.5 C5A 9 Max. Continuous Discharge Current 11 A 10 Max. Pulse Discharge Current 30A( 2s pulse ) 11 Max. Diameter(include PET) ≤18.40 mm 12 Max. Height (include PET) ≤65.50mm 13 Weight (Approx.) 44.0g 14 Impedance (Max. at 1000Hz、charged status) ≤ 18 mΩ 15 Charge Method (CC/CV) Standard 0.2 C5A×5hrs Quick 1 C5A×2.5hrs. 16 Operating Temperature Charge 0℃~45℃ 32oF~113oF Discharge -10℃~60℃ -4oF~140oF Storage -20℃~45℃ -4oF~113oF Characteristic of 2200mAh Li-ion cylindrical battery Without special instructions, the following tests should be done under the condition of : temperature(23℃±3℃), atmospheric pressure (86KPa~106KPa), relative humidity (45%~85%), and the tests should be done within two weeks after receiving the products. the definitions of some nomenclatures of this specification standard Charge: Charge with current 0.2C5A to limit charge voltage under the condition of23℃±3℃ surrounding temperature, then change to charge with constant voltage till the current less than or equal to 0.02C5A. Electrical Characteristic for Cylindrical Rechargeable Electric vehicle li-ion Battery NO. Item Standard Test Method 1 Discharge rate capabilities A)1 C5A ≥97% B)5 C5A ≥95% Standard charged under the condition of normal atmospheric pressure and the environmental temperature of 23℃±3℃ and45%~85%RH, then rest for 30mins and discharge at1C5A、5 C5A、10 C5A to the discharge cut-off voltage respectively. Charge/discharge cycle can be conducted for 3times before meeting the Standards(the same below) 2 capacity....
Please Note that this information was issued on BestB2B.com!
Insulation Panel,roof panels2024-01-29
EPS sandwich panel2024-01-29
Insulated Metal Panels Increas2024-01-29
Insulated Metal Roof Panel2024-01-29
Light Insulated Metal Wall Pa2024-01-29
Insulated Metal Wall Panels2024-01-29
Insulated sandwich panels / In2024-01-29
Trapezoidal Roof Panel / Wall2024-01-29
100G QSFP28 SWDM4 100m LC Opti2024-02-01
100G QSFP28 SR4 100M MPO Optic2024-02-01
200G QSFP56 SR4 100m MPO Optic2024-02-01
400G OSFP SR8 100m MPO Optical2024-02-01
400G QSFP-DD LR8 10KM LC Optic2024-02-01
400G QSFP-DD LR4 10KM LC Media2024-02-01
400G QSFP-DD 4x100G LR 10KM 2024-01-29