Hot-melt Road Marking Paint

Descriptions of the Hot-melt Road Marking Paint Hot-melt Road Marking paint is composed of petroleum resin, EVA, PE wax, pigments, etc. Under the room temperature, it is in the form of powder. When heated to 180-220 , it is like flow and there will be hard lacquer film if coated on the road. The mark has the characteristics of strong resistance. If the reflective glass beads are put on the mark in the process of construction, the reflective effect will be very well. Therefore, this paint is widely used on the highway and the city road. According to the environment, construction temperature and the reflective requirements, we will offer different materials Features of the Hot-melt Road Marking Paint 1. Strong adhesion: In order to improve the adhesion a special rubber elastomethe has been added to the paint; 2. Drying fast: It will take only 2 to 3 minutes for the road to become dry and open; 3. Good reflection. 4. Good anti-cracking ability. 5. Bright color: good weather resistance, exposure perennial does not change color. 6. High Coating Rate: small density, large volume, high spreading rate.

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29