High Quality rubber o ring

　　O-rings are sealing elements providing a seal against liquid and gaseous media. They are suitable for secondary static and dynamic use. O-rings can be integrally sealed radially or axially. Sealing is created during assembly by axial or radial compression of the section. In working condition, the fluid pressure increases the deformation of the O-ring and therefore strengthens the sealing function. For optimal sealing, choose O-rings with the largest possible torus diameter. 　　In the assembly space, pay particular attention to the following elements: groove filling, precompression, elongation and settlement. 　　During static use, the precompression should be between 15 and 30% of the torus diameter. During dynamic use, it should be between 10 and 18% (hydraulic) or between 4 and 12% (pneumatic). 　　When fitted, the O-ring must be: 　　- expanded by max. 6% of inside diameter 　　- tablet of max. 3% of inside diameter. 　　The NBR material has high wear resistance and is resistant to lubricating oils and greases based on mineral oils, hydraulic oils H, HL, HLP, hardly flammable pressurized liquids HFA, HFB, HFC, aliphatic hydrocarbons, oils and silicone grease, water up to approx. 80°C. 　　Temperature range : 　　-30°C up to +100°C

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29