Welded membrane filter plate f

Welded membrane filter plate is the top priority when selecting a filter plate, for it significantly shortens the filter cycle by skipping the non-productive phase of pressure filtration. A couple of welded membrane plates can be used alone or combined with chamber plate. The combination makes full use of each other’s advantages. Chamber filter plate is quite effective in the first part of filtration, and during the non-production part, membrane plate will significantly shorten the operation time and reduce the dryness of the cake. Welded membrane plate is an integral whole, and replaceable membrane plate can be separated into core body and membrane. Due to this character, the whole membrane plate should be replaced whether core body plate or membrane has damaged. This will increase production cost. Advantages Substantially reduce the moisture percentage of filter cake. Reduce the filtration time and improve production efficiency. Complete separation of the membrane squeeze medium and the filtrate to avoid chemical actions. Pip-shaped molded structure prevents the membrane from laying flat on the body plate. A uniform distribution of the squeeze medium enables the membrane to expand evenly and creates a uniform squeezing effect on the filter cake. Thickness of membrane is between 3 mm to 4 mm. Operation pressure is usually rated at 7 bar to 16 bar. Maximum working temperature is up to 120°C. Materials Core body plate can be manufactured by polypropylene, synthetic rubbers such as EPDM, NBR, and TPE (Thermoplastic Elastomers). Flexible synthetic rubbers are very suitable for difficult and uneven formation of cake. TPE or thermoplastic elastomer combined the main advantages of polypropylene and rubber, features good mechanical properties and excellent corrosion resistance by heavy metals. Feed eye Feed eye positions are often center feed, corner feed, and external feed. Other special feed positions are available for special orders. Standard....

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29