Shoe Molding Silicone Rubber

Description of RTV-2 Silicone Rubber for Shoe Mold Making RTV-2 silicone rubber is a two-component material, the silicone consists of Part A silicone base and Part B CA30 curing agent, and the silicone base and curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicone mold: shoe mold making, sand casting etc. Specifications of RTV-2 Silicone Rubber for Shoe Mold Making 1. Good flow ability and long working time 2. Medium hardness 3. Easy de-mould from shoe mold 4. Low linear shrinkage Applications of RTV-2 Silicone Rubber for Shoe Mold Making RTV-3010/3015/3020 silicone rubber is suited for shoe mold, simple products, sand casting mold making, and shoe mold by pouring way. Data of RTV-2 Silicone Rubber for Shoe Mold Making Base and Curing Agent Mixture (100:2 by weight) in 25℃(77?) testing Item No. RTV3015 Color off-white Curing agent CA30 Mixing ratio 100:2 Mixed viscosity *-* cps Pot life 5-10 Minutes Curing time 4-6 Hours Hardness 15-18 Shore A Tear Strength 20 N/mm Tensile Strength 2.6 Mpa Relative density 1.09-1.15 g/cm3 Shrinkage ≤0.3% Elongation at break 600%

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29