PCB Electronic Potting Silicon

1.Application: -Applying for the surface of PC,PP,ABS,PVC,metal -Potting for the Protection of general electronic module -Insulation,waterproof and bonding of electronics parts -Filling for LED,LCD electronic display,circuit board -Outdoor protection for LED screen. 2.Characteristics: Low viscosity,easy pouring operation ,and good bonding feature.It can be cured completely at room temprature.The safety of potting compound silicone can reach the EU-ROHS requirements fully. 3.Technical Guidelines 1. Pls put part A and B in separate container and stir evenly before mixing the two parts together. 2. Mixing Ratio part A:part B is 10:1 3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3 minutes. 4. HY-215# is cured at roon temperature, so pls put it under room temperature after pouring. It comes to next process when basically cured, and it takes about 24 hours for completely cured 4. Warm Tips for for PCB Electronic Potting Silicone 1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting. 2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes. 3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using, it does not affect the performance.

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29