Pre-heating Solar Water Heater

1.The copper coil is inside of non pressure tank, the copper coil could bear the pressure by 0.7mpa during the operation. 2.It is with feeder tank and could load the water automatically 3.Vacuum tube heat the water inside tank, then the hot water in tank could heat the water in the copper coil 4.It is a pre-heating and heat exchanging process 5. Only if the water in tank is hot, you could get more hot water and it exceeds the limit of the capacity of tank 6. You could use the hot water inside copper coils and also use the hot water in the tank Material Inner tank: SUS304/2B 0.4mm/0.5mm/0.6mm Outer tank: zinc steel plate 0.4mm/PVDF/SUS304/SUS430 Insulation layer: PU Vacuum tube: QB-AL-NAL-58*1800 Frame: zinc steel painted plate 1.5mm/aluminium sheet 1.2mm/SUS304 1.2mm

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29