shore hardness tester HT6510F

Product synopsis Model: HT6510F Durometer Type F is an exclusive design for testing soft cellular materials. The large diameter presser foot and cylindrical indentor configuration allow measurement by direct application to the test specimen. SPECIFICATIONS Display：4 digits, 10 mm LCD Range：0~100 Resolution： 0.1 Presser foot: 80mm diameter Indenter: Extension 2.54mm 25.2mm Cylinder Spring force: 455gf Measurement deviation: ≤ ±1 Power supply: 4x1.5v AA (UM-3) battery Operating condition: Temp. 0~50℃ Humidity <80% Size：162x65x28mm (6.4x2.6x1.1inch) Weight：about 490g（not including batteries） PC interface: RS232C interface Power off : 2 modes Manual off at any time by depressing the power key till OFF shows on the display or Auto power off after 2 minutes from last key operation . Accessories： Carrying case 1 pc. Operation manual 1 pc.

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29