High accuracy TDS tester

1 Range: 0~9990ppm (mg/L) 2 Calibration: Factory Calibrated 3 Temperature Compensation:Automatic 4 TDS meter Easy to change the electrode 产品详细描述 ： Energy conservation TDS meter Energy conservation 1 Range: 0~9990ppm (mg/L) 2 Operating Temperature: 0~50°C 3 TDS meter accuracy: ±2%F. S 4 TDS meter environment:0 to 99°C (32 to 212°F) 5 TDS meter Calibration: Factory Calibrated 6 TDS meter Energy conservation 7 Operating Temperature: 0~50°C 8 Power source: 2×1.5v(button cell) 9 Temperature Compensation:Automatic 10 TDS meter Easy to change the electrode 11 size: 142X 25X15mm 12 weight: 36g OPERATING INSTRUCTIONS 1.remove the protective cap. 2.press the ON/OFF button once out of the water. The tester will read “000” 3. Immerse the tester into the water no more than 2 inches. 4.wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes(30seconds), press the HOLD button to view out of the water. 5.press the ON/OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use. 6.after usage, shake off the water from your tester or wipe it with a tissue. Note: If the tester displays a flashing”X10”icon, multiply the reading by 10.

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29