Button snap tester

Button snap tester To determine the holding or breaking strength of prong-ring attached snap fasteners onto garments. Consists of an Upper Snap Clamp, a Lower Fabric Clamp & Force Gauge mounted on a Stand. The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the Top Flywheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded. Used for measuring the responsibility of garment manufacturer to ensure button and firmware can be fixed on the ready-made garments properly, Avoiding button drop from garment to brought danger to baby swallow. Used for testing the vertical orientation tension of button and added touch. Dimensions : 280 x 230 x 735 mm （L×W×H） Weight:25 kg Accessories: a) 30kg Impact Force Gauge FB-30K: 1Pc b) Upper Stud Clamp: 1Pc c) Snap Clamp: 1Pc d) Lower Fabric Clamp, Lever Arm locking: 1Pc e) Three Pronged Clamp: 1Pc f) 17 Standard Pressure Clamp 17: 1Pc Standards：16 CFR 1500.51-53, ASTM WK4510 PS79-96，ASTM F963，EN71-Part1,M&S P115A

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29