MVCI for TOYOTA TIS

MVCI is a high performance factory diagnostics and reprogramming interface for TOYOTA TIS. MVCI is compatible with Toyota, Lexus, and Scion vehicles over the J1962 DLC3 connector. Features Fully compatible with Toyota TIS Techstream Supports Diagnostics, Reprogramming, Active tests, and key programming Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with OBDII/DLC3 diagnostics Fully compatible with SAE J2534 Programmable power supply Able to apply 5V-24V to OBD pins 6,9,11,12,13,14 or AUX 2.5mm stereo connector Able to apply GND to OBD pins 6,9,11,12,13,14,15 or AUX 2.5mm stereo connector RGB status LEDs Supported Protocols K-Line ISO 9141 KWP 2000 ISO *-4 SAE J1850 PWM SAE J1850 VPW CAN 2.0B ISO * CAN ISO *-4 Specifications Operating Temperature: -20 to 70 °C ( -4 to 158 °F ) Storage Temperature: -40 to 85 °C ( -40 to 185 °F ) Diagnostic Interface: 16PIN USB Interface : USB 2.0 Power: DC 5 V - 36V Consumption: 0.7W Dimensions: 95mm(3.74″)L x 49mm(1.93″)W x 28mm(1.10″)H Net Weight: 85g Gross Weight: 193g Accessories Included User Manual: OBDfactory Instructions on tool operations Driver CD: Includes user manual, drivers, and etc. OBD II cable: Communicates between tool and vehicle USB cable: Communicates between tool and PC/Laptop Carry case: A nylon case to store the tool when not in use

Please Note that this information was issued on BestB2B.com!

Insulation Panel,roof panels2024-01-29

EPS sandwich panel2024-01-29

Insulated Metal Panels Increas2024-01-29

Insulated Metal Roof Panel2024-01-29

Light Insulated Metal Wall Pa2024-01-29

Insulated Metal Wall Panels2024-01-29

Insulated sandwich panels / In2024-01-29

Trapezoidal Roof Panel / Wall2024-01-29

100G QSFP28 SWDM4 100m LC Opti2024-02-01

100G QSFP28 SR4 100M MPO Optic2024-02-01

200G QSFP56 SR4 100m MPO Optic2024-02-01

400G OSFP SR8 100m MPO Optical2024-02-01

400G QSFP-DD LR8 10KM LC Optic2024-02-01

400G QSFP-DD LR4 10KM LC Media2024-02-01

400G QSFP-DD 4x100G LR 10KM 2024-01-29